Nobody likes to clean the office toilet. Nobody, that is, except for the boss.
It’s not something you want to do, but you have to do it. With some bathroom cleaning tips and tricks, you can avoid spending hours scrubbing at the bowl only to discover your efforts made little difference. Cleaning your office toilet is an unpleasant chore but with these tips on how to clean and de-scale your office toilet, you’ll be able to get it done in no time.
The first step to cleaning your office toilet
It might seem like a no-brainer, but you need to make sure your office toilet is clean before you start scrubbing it. If you don’t, all of your efforts will be for naught and it won’t take long for the dirt and grime to come back.
What’s one of the first things you should do? Office Cleaning! A little soap and water will do the trick. Make sure to give the bowl a good scrubbing including under the rim and around the tank as well as on the seat. Rinse off any residue that’s left behind then dry with paper towels or a cloth.
Dealing with a clogged toilet
It’s inevitable, you’re going to clog your toilet. When it happens, you’ll need to get a plunger and plunge the toilet before sitting down.
The first thing to do is to cover the toilet seat with a towel. The last thing you want is for all that gunk and bacteria to splash up onto the seat and contaminate the area. Once you’ve covered the seat, place the plunger over the hole in your bowl and apply pressure until it unclogs.
If this doesn’t work, take off the plunger and turn on your sink so that water can fill up in your bowl. This will allow for more suction power when plunging again. Repeat until it unclogs!
How to clean the bowl
The first step to cleaning your office toilet is to remove the tissue and wipe down the seat. Then, keep a bucket filled with clean water and a rag or sponge nearby.
You’ll want to use this water mixture for all of your cleaning needs. Pour some of the mixture into the toilet bowl and let it sit for about 5 minutes before scrubbing the sides.
The next step is to pour another bucket of water into the bowl—this time without any soap in it. Scrub the sides again until you see any dirt or grime coming off. You may need to repeat this process a few times before you’re done scrubbing.
Finally, flush out the toilet and scrape off any remaining debris from inside with a plastic scraper before rinsing everything down with a hose.
Tips for maintaining your clean office toilet
- It can be a pain to clean your office toilet. But, you don’t have to spend hours doing it. Follow these tips for maintaining a clean office toilet space:
- The first thing you want to do when cleaning your bathroom is to flush the toilet. This will remove any residual particles that could cause stains or unpleasant smells.
- Next, use a plunger or a pair of pliers or tongs to remove any clogs. If there’s nothing in the bowl, then this step is unnecessary.
- Use an enzyme cleaner on the seat and around the base of the bowl, working from the back of the toilet towards the front so that you don’t accidentally get cleaner on your hands.
- Scrub with a cloth around the sides of the bowl and inside where it meets the floor.
- Once you’re finished scrubbing, use a wet towel to wipe down all surfaces in order for them to dry quickly and reduce bacteria growth. Wipe up all spills and other fluid messes before they set into stains and smells!