How do you program Spectrum remote for TV?


Are you bored of using multiple remotes to control different devices? Remotes can be programmed to control multiple devices.

When you need to program remotes that can be used with different devices, Spectrum can be one of the top options. You can program the Spectrum remote so that it controls your cable box as well as your TV without the need for multiple remotes. Also Read: best 65 inch tv under 600

The most appealing thing is that it’s simple to do and will take only a few minutes. An overview of how to program the Spectrum remote is below. If you’re one of the fortunate ones who has already registered for Spectrum TV, congratulations! Your binge-watching sessions are about to leap ahead. 

Through providing you with an amazing service that is centered around you and your needs, Spectrum TV will allow you to watch whatever and whenever. Spectrum TV subscription allows you to stream whatever you like at any time and from wherever you are, without getting bored!

How Do I Program My Spectrum Remote to Work With My TV?

An instruction manual for the user and a user guide on programming Spectrum Remote to your TV and other devices will be available. If you don’t know the model number of your remote remove the battery cover and search inside to find it. The setup process can begin Spectrum Remote setup after you are able to identify the model number.

Spectrum Guide Spectrum Guide quickly detects the model and make of your TV and will guide your to the Spectrum Remote programming process. It then allows you to use easy buttons to control your television and audio devices. 

If you’re on the other side your TV’s manufacturer isn’t known, or you wish to complete the job yourself, you can opt to complete the task by studying instructions for the Spectrum Remote Setup instructions. Also Read: best tv for zwift

Spectrum Remote 1060BC2/1060BC3 to TV Programming

Find the 5 digit programming code that is associated with your TV. Below you will see the code you’re searching for.

On the remote, press the device’s key that is labelled “TV” once.

Press the SETUP key and wait for the mode you have selected to light twice.

If you are using the code of 5 digits from the previous table enter the code of your device. You’ll notice that the selected mode key blinks twice.

If the selected mode button blinks for a long period of time, go back to step 3 and enter the same code.

Then, point the remote control towards the television and then press the Power/Play button once. The TV must be shut off. If the TV doesn’t turn off follow the step 2 to 5 until you find the code that can be used. If it doesn’t work, you’ll need to figure out how to fix the issue.


If you’ve tried everything but the TV doesn’t respond to your remote, check these solutions for troubleshooting to fix the issue.

  • To look back through the codes, and to turn to the Television, you must press then release the CH key.
  • Hit the television button of your Spectrum remote once.
  • Then, press the SETUP button and don’t hold it until the TV’s key blinks twice.
  • After that, type in the numbers 9 9 1 , and let the TV’s key blink for a second time.
  • Then hit the number one key. After that the TV button blinks twice.
  • After that, using your Spectrum remote controlled by the TV, press the power button once.
  • After that, continue pressing and release then release CH key. If the television has been turned off, bring it to a complete stop.
  • After that, press the power key to switch on the television, then press the SETUP key to save the code.

Spectrum Remote Universal CLIKR-5: UR5U-8780L / 8790L to TV Programming

The Spectrum remotes can be configured with an easy Auto-Search method which anyone can implement. Also Read: best tv for college students

Manual Method

If the TV model you own is not included in the list of digital codes then you’ll have to purchase the manual to program the remote Spectrum Remote using the Manual Method before following the steps below:

  • On the TV, turn it on.
  • For three seconds you can simultaneously press the TV button as well as the OK/SEL buttons on the remote. The TV’s LED will be lit in a period of 30 seconds which indicates that it is now ready for programming.
  • You can now connect your remote towards your TV and dial the code assigned to the TV manufacturer. Begin by trying each code until your device is turned off, if there are a number of codes that match your brand of TV. Before entering each code, make sure to be patient for a few seconds.
  • To ensure you’ve entered your correct channel, press the power button. Your TV should now be back on. You can try switching channels once the TV has been turned on to determine if you’ve succeeded in setting your Spectrum remote.
  • To lock the code, press the button on the device. The device’s light will blink twice to confirm that the code was entered correctly.

How do you configure the Spectrum remote controller to manage the cable box

This is a step-by-step guide to program the Spectrum remote control:

  • On the television, turn it on.
  • Place the Spectrum remote close that it is in close proximity to your cable box to be looking towards it.
  • On the remote also, press simultaneously both the “CBL” and “OK/SELL” buttons. Place them on the remote for a few seconds , until the LED light comes on.
  • The remote is now ready to be programmed when the light turns on. Input the appropriate codes for the brand and model now. Since some brands come with multiple codes, it is possible that you need to input them multiple times before you find the correct one (waiting just a few seconds following every incorrect code).
  • It will shut off instantly after you enter the correct code. If this happens, press”POWER” on your remote “POWER” button on the remote to check it. The test is completed If it comes on.
  • In order to save your code, and finish the procedure, press “CBL” button once again.

Are you having trouble finding your code? Here’s how you can accomplish:

If you’re not able to get the setup codes to program the Spectrum remote for your TV was successful or if the TV’s model isn’t listed, and you’re not able to finish the configuration You can search for codes by following steps below:

  • Switch on the TV.
  • Press then and hold down your SETUP button for 2 second or till the indicator turns on twice.
  • Hold the OK/Enter key after that.
  • Release the OK/Enter button after the TV goes off. The code is deactivated.

How to Connect a Spectrum Remote to a Radio Frequency Device

With just a few steps, you can program the Spectrum remote to talk to your receiver via radio frequency. You are able to make use of the Spectrum remote even if your receiver isn’t visible when you follow the Spectrum remote setup in this manner.

To connect your remote and receiver using radio frequency, you must follow the instructions in the following:

  • Locate and press on the MENU button located on the remote.
  • Choose SETTINGS and SUPPORT from the menu located on the left of your TV.
  • Choose SUPPORT from the menu on the left.
  • Select REMOTE CONTROL in the middle tiles right now.
  • After that, from these tiles, choose the RF PAIR NEW REMOTE.
  • Follow the instructions displayed on the screen.

Frequently Asked Questions

On the case of my Spectrum TV remote which kind of battery do I need to use?

What’s wrong with my TV? properly controlled through my remote?

When I press any of the keys with my remote what the LED flashes a few times?

What is the most efficient method to set the volume of the Spectrum remote?

How can I utilize the Spectrum DVR remote?

How do I turn on the TV with the Spectrum remote?

What’s the best way to make use of Spectrum remote? Spectrum remote as an universal remote?


Signing up to the Spectrum bundle or plan could be among the best choices you can make in the quest for an uninterrupted TV connection. There’s nothing that can stop the enjoyment you can indulge in the amount you’d like. There is never a shortage of channels or variety due to the huge spectrum of channels that covers almost all kinds of entertainment. You’re ready to begin your journey of a lifetime when you explore the world of endless entertainment Spectrum TV offers to users once you’ve programmable the Spectrum remote for your TV after following the extensive instruction!

You can convert the Spectrum remote into an “universal” remote control for all of your devices by following the instructions above. There is no requirement for multiple remotes. All your devices can be controlled from the same area.

If you’re having issues, visit the nearest Spectrum Service Center to swap your remote, or contact Spectrum Team Spectrum Team to help you solve the issue.