How Do I Run a Network Stability Test?

92
How Do I Run a Network Stability Test?

Around 62.5% of the world’s total population uses the internet. It used to be a novelty, but today, it’s a vital lifeline for most of us. Not only does the internet allow us to connect with our loved ones, but it also enables us to conduct online businesses and open doors of opportunity that weren’t available before.

Understandably, you’ll want a fast and stable internet connection. To make sure you have one, you should run a network stability test, especially if things don’t seem to be running normally.

Read on to find out how to do some test and network troubleshooting!

What Is a Stable Internet Connection?

First, let’s define what a stable internet connection is so you can recognize the signs of network connection failures.

A stable internet connection is when you have no packet loss and there’s no jitter (or it’s close to being 0). There are a few reasons why your internet connection might lose packets or have high jitter. And to find the root cause, you’ll need to perform a network stability test.

How to Perform a Network Stability Test

One of the easiest ways you can test your network stability is to use Ping. This is included in all Windows computers, so you won’t have to install anything extra.

Open up a CMD window, then type in “ping -t”. Follow it with the IP or domain so it looks like this: “ping -t 8.8.8.8”. Hit Enter and expect this to take a few hours.

Once the computer’s done running this script, hit Ctrl + C to get the results. You’ll see the packets sent, received, and lost, and these will have a percentage next to them.

The most important thing you need to check is packets lost. If that number is low or at 0, then your network stability is good. The same with the minimum and maximum roundtrip time; this should be low, like 10ms.

How to Fix High Packets Lost

If there’s a high number of packets lost, then the issue can be either on your side or the ISP’s.

To check if it’s on your side, simply disconnect from wifi and connect directly to the router with an ethernet cable. Run the test again and if the packets lost go down, then that means the issue was on your side.

If the packets lost are the same, ping a computer in the same network. If you’re still experiencing packet loss, then it’s an issue with your ISP.

If you find that your network isn’t doing so well, then have a company like ctctechnologies.com assist you. They can provide all the structured cabling and network cabling solutions your company needs to maximize your network’s performance.

Make Sure You Have a Stable Internet Connection

Now that you know how to run a network stability test, you’ll know if there are any connectivity issues with your internet. From there, you can take the appropriate steps to rectify the situation and have a good internet connection!

To read more about technology, keep browsing our blog page now!