Netgear extenders are one of the most trusted networking devices when it comes to accessing a high-speed internet connection. By connecting their WiFi-enabled devices to the extender’s network, users can enjoy unlimited hours of playing online games, listening to music, and much more. However, the problem arises when client devices are connected to the extender’s Netgear_ext, but no internet connection is there. If you are also struggling with the same issue, then we’ve got you covered. In this post, we have shed light on various troubleshooting hacks to get the problem fixed. So, read on.
Fixed: Connected to Netgear_Ext but No Internet
Before you start troubleshooting the issue, check whether you are facing the problem with a single WiFi-enabled device or with all devices. If the issue is with all your WiFi-enabled devices, then walk through these hacks:
- Check Connection Between WiFi Devices
You might be unable to access the internet on your WiFi-enabled devices if the connection between your Netgear range extender and the host router is unstable. To get the problem fixed, you need to strengthen the connection between your WiFi devices. Have a look at the following instructions according to the source of connection used:
- For wired connection: Make sure that the Ethernet cable you have used to connect your Netgear extender and router is damage-free. Apart from that, it should be properly connected to the ports of your WiFi devices.
- For wireless connection: Ensure that your WiFi devices are placed at a safe distance from each other. Know that too much distance between them can result in improper transmission of WiFi signals and too much closeness might result in a clash of their WiFi signals.
After strengthening the connection, try to access mywifiext.local and see if you get success. If not, then the issue might have arisen due to the WiFi interference.
- Eliminate WiFi Interference
WiFi interference is another reason that might force you to face the no internet connection issue even after being connected to the Netgear extender’s network. Therefore, it is advised to keep the extender in a no interference zone. FYI, no interference zone is an area free from devices emitting radio-wave frequencies. Microwave ovens, televisions, refrigerators, treadmills, Bluetooth speakers, baby monitors, etc. are some of those devices.
Apart from that, no interference zone is also free from reflexive surfaces, metal objects, and utensils containing a large amount of water.
- Reboot the Netgear Extender
You might be unaware, but the rebooting process has been one of the most effective solutions to get rid of issues related to the Netgear extender. This is because it helps in eliminating technical glitches. So, consider giving a fresh start to your wireless extender.
Here’s how you can reboot your Netgear extender:
- Press the Power button on your Netgear device to switch it off.
- Unplug your Netgear wireless extender from the power source.
- Let your device stay idle for some time.
- Plug the extender back into the power outlet.
- Lastly, press the Power button on your extender to switch it on.
Once your extender gets rebooted properly, open a web browser on your PC and try to access mywifiext. Did you get success? No? Fret not! Give a shot to the next troubleshooting step.
- Reset Your Netgear Extender
If none of the aforementioned troubleshooting tactics have worked in your favor, there is a high possibility that your Netgear extender is configured improperly. The only solution left is to set up your WiFi device again. But, before you do that, you need to restore your Netgear wireless extender to the factory default mode.
Given below is a set of instructions you have to follow in order to reset your Netgear wireless range extender:
- Ensure that your Netgear range extender is getting a fluctuation-free and adequate power supply.
- Once assured, check all sides of your range extender and find the Reset button.
- Now, grab a pin-like object.
- Press and hold the Reset button with the help of the pin-like object.
- Wait patiently until your Netgear extender does not get restored to the factory default mode.
As soon as your WiFi device gets restored to the factory default mode, set it up from scratch using the 192.168.1.250 IP address.
Conclusion
That’s all about how to fix the connection to Netgear_ext but no internet issue. We hope that the troubleshooting tips discussed above will help you get rid of the problem and you will regain access to a speedy internet connection.