Long periods of exposure to the sun’s blistering heat, sharp hailstones, torrential rains, and other harsh weather elements can all cause problems for your roof. Roof blistering is one of them, and it’s a common problem with asphalt shingles or built-up roofing (BUR). Roof blisters are common among professional roofing services, and they’ll advise you to keep an eye out for signs of blistering on your roof. If you don’t, you could be in for some time-consuming and expensive harm in the future.
Following regular maintenance checks and addressing minor concerns is the best method to maintain your roof, effectively safeguarding your property. This is to save the damage from spreading and becoming a more expensive roof repair, but not all of it can be remedied cheaply. Particular variables, such as blistering shingles, produce certain damage that you must address appropriately to avoid future damage and unnecessary repair expenses.
What Is Roof Blistering, and How Does It Work?
Blisters form when moisture or air is trapped beneath the layers of the roof or within the shingles themselves. The pressure in these patches causes the air or moisture to expand as the temperature outside rises. As a result, the asphalt will degrade, leaving a blister on the surface of your roofing material.
Blisters are usually minor and harmless. However, they can sometimes allow higher quantities of moisture from rainwater to penetrate beneath the surface, resulting in more and more severe blisters. Your roof will leak sooner or later, forcing you to call for a roofing service in Fife for replacement.
The Roots of the Problem
• Inadequate Installation – If the shingle glue isn’t placed correctly owing to improper installation, moisture can infiltrate below the shingles, gather, and evaporate over time. This causes blistering of the shingles, as well as other sorts of roof damage.
• Moisture Trapped in the Manufacturing Process – Moisture can be trapped in the manufacturing process and then evaporate when exposed to sunshine. As a result, the shingles become heated, and blisters form. As long as the shingle granules are mostly intact, this won’t harm the lifespan of the asphalt shingle. But, if some have popped, they’ll need replacement because they’ve already been exposed to the environment.
Consider These Preventive Measures
Maintain a Dry Environment
Using dry materials in dry surroundings is the number one rule for preventing commercial roof blisters. Here are some suggestions for keeping your roof and supplies dry:
• Seal any substrate materials.
• Store roofing materials inside or under tarps that are well-sealed.
• Before installing the new roof, ensure the substrate is dry after any harsh weather or cleaning.
Installing It Correctly
Another blister-prevention technique is to ensure that your materials are in firm touch with one another for effective adherence.
• Tightly adhere the insulation board to the substrate.
• Remove impurities or dust from the work area.
• Provide adequate ventilation.
Inspections performed regularly
It’s critical to have a maintenance contract with a local roofing contractor, whether you have a new roof or one that is a few years old. A maintenance contract ensures that your roof is evaluated regularly and rectifies any damage before it causes significant damage to your substrate or building.
How to Fix Roof Blisters
Roof blisters that contain air, in general, nevertheless keep water out of the substrate. Unless your roof blisters meet the criteria listed below, you may be alright leaving them alone:
• Grain, granule, or other surfacing loss
• Deterioration of the membrane
• Blisters in the seams, resulting in a reduction in lap covering
• Blisters with holes that allow moisture to pass through
• Fatigue cracking around the perimeter of blisters
• Blisters that appear in high-traffic regions
If your blister needs fixing, hiring a professional roofing service is preferable to do it correctly. If the manufacturer’s warranty still covers your roof, contact the contractor who installed it to see what they can do to assist you.
A contractor can fix a blister in several ways:
1. Membrane roof – Remove any loose membrane, replace moist insulation with identical material, and reinstall with 6-inch-wide overlapping borders.
2. Bitumen roof — An X in the blister allows access to the layer beneath if the membrane is in good condition. If the membrane is destroyed, your roofer must replace the entire damaged area.
Roofing Services Edinburgh
It might not be easy to decide whether or not to invest in a business roofing job. You can discover the proper contractor to offer high-quality work at a reasonable price if you are prepared and ask the right questions.
R & J Roofing is the company to call for skilled commercial and residential roof replacement. Their services are versatile and comprehensive; they can recoat, repair, or replace your facility’s roof to ensure that it lasts for decades. Call them immediately! You can also use their easy-to-use contact form.